These meters are fitted with an impulse trasmitting contact and so can be connected to a data collection system for consumption data to be recorded. Counting impulses are released by a Reed contact.
|
In dry-rotor version meters the totalizer is encapsulated in a watertight compartment and so is protected from dirt and contamination.
Cold water: max. 40°C Hot water: max. 90°C
The use of such meters is desirable with water of poor quality where is a risk of the mechanism becoming clogged with sludge or sand.
|
With impulse contact:
|
Horizontal installation, thread:
Maximum flow Qn:
Thread:
|
||||||||||||
|
|
Horizontal installation, flange:
Qn 10 DN 50 - 2” Qn 10 DN 50 - 2” (Woltmann) Qn 15 DN 65 - 2 ½” (Woltmann) DN 80 - 3“ (Woltmann) DN 200 (Woltmann)
|
|||||||||||||
|
Multi-jet meter water flows throught a number of inlet channels around the impeller chamber. This ensures an even loading of the impeller bearing, and thus prevents their wear, even with severe fluctuations in the rate of flow. Use is only made of high-quality, wear-resistant materials. The measuring units meet the requirements of the German physical testing laboratory (PTB) and EU standards. |
||||||||||||||
Tecnical data:
|
Connection type |
Thread |
Flange |
||||||||||||
|
Connection (inch) |
¾” |
1” |
1 ¼” |
1 ½” |
2” |
2 ½” |
2 ½” |
2 ½” |
|
3” |
|
|
||
|
Connection (DN) |
15 |
20 |
25 |
30 |
40 |
50 |
50 |
50 |
65 |
80 |
100 |
200 |
||
|
Type |
impeller |
Woltmann |
||||||||||||
|
Length size (mm) |
110 |
130 |
260 |
260 |
300 |
300 |
|
|
|
|
|
|
||
|
Maximum flow (m3/h) |
3 |
5 |
7 |
10 |
20 |
30 |
30 |
30 |
120 |
|
|
|
||
|
Normal flow (m3/h) |
1,5 |
2,5 |
3,5 |
5 |
10 |
15 |
15 |
15 |
65 |
|
|
|
||
|
Min. flow (l/h) |
30 |
50 |
70 |
100 |
200 |
450 |
450 |
450 |
|
|
|
|
||
|
Temperature max. (°C) |
40 (cold water) or 90 (hot water) |
40 (only cold water) |
||||||||||||
|
Pressure maximum (bar) |
16 |
|||||||||||||
Impuls contact: each 1, 10, 100, or 1.000 litre, Special type: 0,25/0,5/2,5/5/25/50/250/500 liter.
|
Electrical data: |
|
|
| Maximum power: 10 VA |
Diameter cable:4 mm | Maximum power:150 VDC/VAC |
| Maximum load: 0,5 VA | Lenght cable:3 meters |
Temperature surroundings:- 20 °C / +100°C |
We reserve every technical change. Version 11/2015 
